Wireless 11n Access Point
19
Aggregation
To aggregate lots of packets into a big one before transmitting
packets. This can reduce control packet overhead.
Short GI
Indicates that the 802.11g network is using a short slot time
because there are no legacy (802.11b) stations present
RF Output Power
Select the signal strength for the wireless network.
* Please click on the
Apply Changes
button or the
Reset
button at the bottom to save/reset the configurations.
3.2.3 Security
The Security function protects your wireless network from invasion. When you connect it to your
PC at the first time, the default configuration is WPA2, and the default password is 1234567890ab.
After you log in, you can modify it. We provide WEP and WPA encryption to secure your wireless
network. Please select Disable, WEP, WPA, WPA2, and WPA-Mixed in the drop list. If you select
none, any data will be transmitted without encryption and any station can access the AP.
Items
Information
Select SSID
Please choose a SSID you have set for this AP in the
Wireless >
Basic Settings
from the drop-down list. The SSID will be shown on
the wireless network for recognizing.
Encryption
There are 5 modes for you to select: Disable, WEP, WPA, WPA2,
and WPA-Mixed. Please refer to the following description.
802.1x Authentication
Users that do not use this function or connecting to an open-wireless
network please skip this part. Please configure the settings in
accordance with the Certificated Server.
