2.5 If still can not start up machine, check whether inside carburetor have gasoline spray
out,
Take out ignition high voltage cap, unscrew the 2 screws, take out
swirl pole
,
Put finger into the hole where
swirl pole
have been taken out.
Keep put finger into the hole, use left hand to pump air pump, then use right hand finger to
feel whether if there have gasoline spray out, if do not have, rotate Adjust Knob of
carburetor to increase power a little bit until finger can feel there have gasoline spray out.
2.6 Check whether the rubber O-Ring is lost,
Note: Please note that, inside the hole, there have a black rubber O-Ring, please do not
lost it.
3. Check
swirl
pole
