CAUTION
Do not use additives . Since the oil also
serves to lubricate the clutch, do not use
car engine oils supplemented with frictio-
n modifiers (such energy-conserving oils
can lead to the clutch slipping). Use a su-
itable, light engine oil for scooters , such
as Motorex SAE 15W/40 mineral oil API
(SG or higher).
- If required, replenish the engine oil(for clas-
sification and viscosity, see the table) via the
oil-filler opening up to the maximum level m-
arking.
Engine oil
Checking the transmission oil level
- Stop the warmed-up engine, wait for appr-
ox. 5 minutes.
- Propping up the scooter on the parking st-
and.
- Remove the oil filler screw (1)and check if
the oil level is below the oil-filler opening.
- If required, replenish transmission oil Hyp-
oid SAE 85W-90 via the oil-filler opening.
- When change new transmission oil, open
the oil hole screw(2),till all transmission oil
is flow out, then tighten the screw (2) and
add new oil via the oil-filler opening.
- Tighten the oil filler screw(1).
NOTES ON MAINTENANCE
Recommended grade:
Per API:SG or higher or also with additional
release status: ACEA A3/96 (CCMC G5)
Recommended viscosity:
Viscosity depends on the outside temperat-
ure. For short while, the temperature may
exceed or fall short of the limits of the SAE
grades.
The recommended viscosity grade SAE 15
W/40 covers the ambient temperature ran-
ge -15
to +
4 0
and therefore represents
the optimum for out latitudes.
℃
℃
2
SAE
W/
10
30
SAE
W/
W/
10
40 10
50
SAE
W/
W/
15
40 15
50
SAE
W/
20
50
-10
°
0
°
10
°
20
°
30
°
C
-20
°
40
°
25
1
