8
ADDRESS CONFIGURATION
Unlock the display - (see connections page)
Press the ADDRESS button for a few seconds. The existing address will appear on the display.
To change the address, press the up or down buttons. Press OK to save your choice.
* If you don’t need addressing,
please choose
Adr.- -
(
Adr.00
less one)
If you want to address your display, the data should be in this format:- :
<ETX><STX><ADDRESS><DATA><ETX>
<ETX> is ASCII code 03hex or 13hex (XOFF)
<STX> is ASCII code 02hex or 11hex (XON)
<ADDRESS> may be a single character or 2 characters
<DATA> is the numeric ASCII data to be displayed.
Set the termination character to 03 if the <DATA> doesn’t include <CR>. The termination
character page tells you how to do this.
Adr.-1
to
Adr-E
for 1 character addressing in the range 1-E
eg. <ETX><STX><5><1234><ETX> displays
1234
on an indicator with
Adr.-5.
An indicator with
Adr.-0
responds to
all
single character addresses, and conversely, any indicator with any single
character address will display any datastring sent with
address 0
.
Adr.01 to Adr.EF
for 2 character addressing in the range 01-EF
eg <ETX><STX><48><2468><ETX> displays
2468
on an indicator with
Adr.48.
An indicator with
Adr.-00
responds to
all
dual character addresses, and conversely, any indica-
tor with any dual character address will display any datastring sent with
address 00
.
PS: Character addresses A to F are the ASCII codes 3A to 3F as follows--> : ; < = > ?
Remember to lock the display after you have finished your settings.
Содержание EasyReader ER4S
Страница 2: ......