•
A/C INDICATOR LIGHT:
Illuminates when the compressor is on and stays solid while the compressor is running. When
the room temperature reaches the set temperature, the compressor turns off and the light blinks indicating that the unit
has cooled the room to the set temperature
•
DEHUMIDIFIER INDICATOR LIGHT:
Press the ‘’FUNCTION’’ button to select the dehumidification mode. When the
dehumidification mode is on, the temperature buttons and the fan speed buttons do not function and the fan will operate
on low speed. The dehumidifier indicator light will illuminate and stay solid while the unit is dehumidifying. When the
humidity in the room is 50% or lower, the compressor will not run, the unit will not dehumidify and the dehumidifier
light will blink. Remember, the exhaust hose does not need to be used in dehumidifier mode
NOTE:
This unit has a three-minute compressor delay protection circuit. Thus, the compressor may take up to three minutes to
start from either being switched on or when changing between the dehumidification and air conditioning functions.
If there is a power interruption while the unit is operating, the unit will not turn back on automatically when the
power is restored. The unit must be turned back on manually. The unit is designed with this safety feature to
protect the compressor.
Cleaning this mobile airconditioner unit
Before cleaning the unit, turn it off and unplug it from the outlet. For safety reasons, never wash the conditioner
Exterior Surfaces of the Unit
•
Clean the air conditioner by using a damp sponge, and dry it with a clean, soft cloth
•
Never use alcohol or any product containing solvents
Air Filters
The air filters located on the back of the unit collect dust contained in the air. The air conditioning unit must ALWAYS be used
with the air filters
•
The build up of dust reduces the efficiency of the air conditioner. Therefore, the air filters must be cleaned every two
weeks, and more often if the machine operates in a dusty atmosphere
•
If the filters are obstructed the air conditioner will be less efficient
•
Each air filter has a tab in the centre and is secured to the unit by two clips on the top and two clips on the bottom of
the filter. Remove the air filters with the unit switched off, by pulling the tab towards you
•
Clean the air filters with a vacuum cleaner. If the filters are very dirty you can wash them in warm water (never use hot
soapy water). Make sure that the air filters are completely dry before putting them back into the unit
•
Do not bend the filters
Trouble Shooting
If your mobile room air conditioner does not work, it is sometimes a minor problem. Before calling London Cool, please check the
following points to see if they solve the problem.
PROBLEM
PROBABLE CAUSE
SOLUTION
The air conditioner / dehumidifier
doesn’t work
The plug is not properly inserted into the
wall socket
Plug the unit in properly
There is insufficient amount of amperage
to start the unit
Check the circuit board for 13 amp fuse
availability
The water tank is full / alarm light is
illuminated
Check drain (A) for an obstruction and/or
empty drain (B)
The air conditioner cut off
The exhaust hose is too long, run
incorrectly or kinked
Exhaust hose can only be extended using
max 5’ of 4’’ PVC pipe for a total exhaust
length of 10’
The unit is positioned to close to a wall or
an object
The unit should be at least 1½ away from
any wall or object
The flap vent obstructs the wall exhaust
Use the screen instead of the flap vent for
wall exhaust
The ceiling or the basement does not
have ample ventilation
The unit will overheat the exhaust pipe
and cannot fully vent
The ‘’timer off’’ function has been
activated
Push the power button to turn the unit
back on
The air conditioner / dehumidifier
LED indicator light blinks
In the a/c function, the ambient
temperature has reached the set
This is normal. Set the temperature lower
