Diesel Generator Operating Instructions
Operation Method
Generator
Diesel
Operating Instructions
Operation Method
Set engine speed control to stop
2
Oil specification
Filling fuel
No exceeding
this level
Open the fuel tank cap and fill
el
the fuel leveler s position will
display diesel fuel mass in the fuel tank and take care the maximum fuel
position shall not excceed the inner strainer of the tank when filling
dies
fuel,
'
.
Keep away from the fire source and heat source
when filling do not fill when be operating
;
.
!
WARNING
0℃
10℃
20℃
30℃
40℃
- ℃
10
- ℃
10
- ℃
20
- ℃
20
( ℉)
32
( ℉)
32
( ℉)
50
( ℉)
50
( ℉)
68
( ℉)
68
( ℉)
86
( ℉)
86
(
℉)
104
(
℉)
104
( ℉)
14
( ℉)
14
(- ℉)
4
(- ℉)
4
Service Categories
API Service Categories CD or higer
ACEA Service Categories E3,E4 and E5
JASO Service Categories DH-1
Oil Viscosity
Select the appropriate engine
oil viscosity based on the
ambient temperature and use
the SAE Service Grade Viscosity
in the chart.
Connect electric battery
Connect the storage battery wire to the
storage battery red for positive
electrode and green for the negative
electrode and make sure screwing the
nut tightly Not contact between positive
electrode to negative electrode to avoid
short circuit After connection metal
parts of two pieces of wire shall keep at
least 15mm safety distance and be
protected by rubber cover.
,
,
.
.
,
,
Move the lever (1) to the right, it click into
the RUN position
Set engine speed control to start
19
Turn on the fuel valve lever
Turn the fuel valve lever to ON and let
the fuel flow into the f
pump.
uel
OFF
ON
( )
1
( )
1
( )
2
( )
2
RUN
STOP
18
