Remove Batteries when Not Being Used:
- It's suggested that you remove all batteries from the chamber
<4>
when storing the camera
for a long period of time.
Specifications:
Battery Supply:
Motor Base –
8 x 1.5V / 4 x 1.5V (AA), Remote Control -- 1x1.5V (AA)
Equivalent Sutter speed:
1/4 Second
Workable Remote Distance:
5-8m
Spinning Modes:
Continuous/Single Spin
FCC STATEMENT:
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Spinner 360° Motorizer:
1 = Motorizer Base Bottom Cover
2 = Motor Pulley
3 = Brass Connector
4 = Motorizer Base 8 Battery Chambers
5 = White Marker Dots
6 = Motorizer ON/OFF Switch and Signal Light
7 = Remote Control Cover
8 = Shutter Release Button
9 = Shooting Mode Selector
Spinner 360° Camera (Sold Separately)
10 = Small Pulley
11 = Rubber Band
12 = Small Hole
13 = Rear Door
14 = Door Lock
15 = Rewind Crank
16 = Take Up Spool
17 = Black Flap
18 = Aperture Switch
19 = Lens
