58
Operating Instructions
Document Number: 814212-2.0-ENG
Original Document
Advanced Product Settings
The Advanced Product Settings screen is displayed by tapping the Advanced button in the
tab of the
screen. The screen is used to select the inspection
options for the product and also set up the lanes where required.
Advanced Product settings are only available at Access level three and above.
The screen consists of two tabbed panes. The Inspection Options pane where you will select
and set up the inspection options and the Lanes pane where lanes may be selected and
setup:
Inspection Options
The Inspection Options pane provides the following items:
Flow Mode - Flow Mode sets the way in which a product passes through the system
Flow Mode
Bounded - This is the default option which should be selected for
products that are presented to the system and pass through it in a
regular and ordered way. All inspection options are available for
selection with this option.
Mass Flow - This option should be selected for loose products are
presented and pass through the system in a random way. The
and
options are not selectable for this option and also
Object Checking is limited to the Loose Objects option.
Inspection Options - This area provides the following:
The Inspection tab is only available at Access level two and above.
Contaminants - In this area a check box is provided for selecting the
Contaminant Detection inspection option. The option is then provided
in the Inspection tab of the Product Settings screen for further
configuration.