OM-ST-4G/6G 3
IMPORTANT - READ FIRST - IMPORTANT
IMPORTANT FOR FUTURE REFERENCE
Please record this information and retain this manual for the life of the equipment. For Warranty Service
and/or parts, this information is required.
SAFETY PRECAUTIONS
Before installing and operating this equipment be sure everyone involved in its
operation are fully trained and are aware of all precautions. Accidents and problems
can result from a failure to follow fundamental procedures and precautions.
The following words and symbols, found in this manual, alert you to potential hazards
to the operator, service personnel or the equipment. The words are defined as follows:
DANGER: This symbol warns of an imminent hazard which will result in serious
injury or death.
WARNING: This symbol refers to a potential hazard or unsafe practice, which could
result in serious injury or death.
CAUTION: This symbol refers to a potential hazard or unsafe practice, which could
result in minor or moderate injury, or product or property damage.
NOTICE:
This symbol refers to information that needs special attention or must be
fully understood even though not dangerous.
TO AvOId PROPERTY dAmAgE, PERSONAl INjURY OR dEATh,
ShUT OFF gAS bEFORE SERvICINg ThE UNIT.
TO AvOId PROPERTY dAmAgE, PERSONAl INjURY OR dEATh,
ChECK All jOINTS IN ThE gAS SUPPlY lINE FOR lEAKS PRIOR
TO lIghTINg. USE SOAP ANd wATER SOlUTION (bUbblES). dO
NOT USE AN OPEN FlAmE.
A. ChECK All jOINTS IN FRONT OF (bEFORE) ThE gAS vAlvE
bEFORE lIghTINg UNIT.
b. ChECK All jOINTS bEYONd ThE gAS vAlvE AFTER ThE
UNIT IS lIT.
TO AvOId PROPERTY dAmAgE, PERSONAl INjURY OR dEATh,
All gAS jOINTS dISTURbEd dURINg SERvICINg mUST bE
ChECKEd FOR lEAKS. ChECK wITh A SOAP ANd wATER
SOlUTION (bUbblES). dO NOT USE AN OPEN FlAmE.
This product is intended for commercial use only. Not for household use.
Local codes regarding installation vary greatly from one area to another.
The National Fire Protection Association, Inc., states in its NFPA96 latest edition that
local codes are “Authority Having Jurisdiction” when it comes to requirements for
installation of equipment. Therefore, installation should comply with all local codes.
Model Number Serial Number Date Purchased
