Lojer LO-1910120EK, Руководство по эксплуатации и техническому обслуживанию

Страница: 10 / 56

Copyright © Lojer Oy, 2012 6
09/2012 Rev. 3.0
Figure 8: Adjusting bar
3.3 Adjusting the draw height
You can adjust the draw height from the adjusting bar (Figure 8) in front of the device (t he clear tube with holes). You
can adjust the draw height or the length of the rope by pulling the adjusting knob and at the same time moving the
adjusting parts up- or downwards.
When using a Vertical Pull device with the lower adjusting wheel, do not pull the rope to the side.
3.4 Length adjustment of the rope
The rope length can be adjust ed from the lower adjustment piece at the chromium plated bar (Figure 8).
3.5 Changing of the drawing handle of Pulleys
The handle is changed by opening the hook at the end of the rope, removing the old handle and replacing it with a
new one. You may use various kinds of drawing handles in Pulleys. You get the standard triangle handles along with
the Pulley (see Accessories catalog or ask your local dealer).