LOHBERGER INDALO, Руководство по эксплуатации

Страница: 25 / 28

English
50
Menü
Menü
Menü
The frost protection is activated or deactivated by
using the „+“ and „-„ key. The frost protection
function is only active in connection with a
room sensor.
The external request is activated or deactivated
by using the „+“ and „-„ key. The external request
function is only active in connection with a
room thermostat.
The lock function is
switched on or off
by using the „+“ or „-„ key.
All the parameters
set are reset to factory values
by using the I/O key.
+
-
+
-
+
-
Menü
Menü Menü Menü
Menü Menü Menü
Menü
Menü Menü
Menü
Menü
Menü Menü
Current flame temperature
Current room temperature
Current operating status
of external request
Combustion chamber door
open/closed or door
contact switch on/off
Safety temperature limiter
contact open/closed
Screw motor on/off
Screw motor information
feed amount
Induced draught
blower motor on/off
Induced draught blower
motor information speed
Convection fan motor
on/off
Display of
operating hours
Display of total
amount conveyed
(in kg pellets)
Display of conveyed pellet
amount since the last
cleaning and maintenance
(in kg pellets)
Display of current
software version
Mainboard
Menü
Menü
Menü
Menü
Menü
Menü
Tip grate contact
contact open/closed
No motor driven
grill at INDALO
Menü
Convection fan motor
information speed
Menü
The C-Fan function is
switched on or off
by using the „+“ or „-„ key.
No convection fan at INDALO
+
-
Menü
Ignition element on/off
Menü
Tip grate motor on/off
No motor driven
grill at INDALO
No convection
fan at INDALO
Menü
Menü
The deviation in the actual temperature of the room sensor
is changed using + and - (adjustment range is +/- 4°C).
+ -
Menü
Display of current
C-sensor value
Not active at INDALO
If active
Menü
Maximum duration without
connection to wireless
room sensor. Value can be
reset using I/0 key
Display menu item FROST
only if the room sensor is connected.
Display menu item ROOM SET
only if the room sensor is connected.
Menü
Menü
Menü
Display of current
software version
Control panel
Display current
software version
on additional
circuit board
Menü