Operating the Logger
USRID-16W User Guide
21
As soon as the file generation is finished,
USb
will blink every second to indicate these files
can now be accessed.
The files are generated each time you plug the logger into the USB port, regardless
of whether the logger is still recording readings or not.
What happens on your computer depends on the operating system of the computer, the
settings made during configuration and whether or not LogTag
®
Analyzer is running.
Microsoft Windows
Up to four drivers will now be installed, depending on the USRID-16W's configuration.
All drivers are part of the operating system and will typically not require administrator
privileges for your computer.
1.
Mass Storage Device
2.
LogTag Mass Storage USB Device
These two devices are required so you can access the data files in the same way as a
USB memory stick. These drivers will not be installed if the USRID-16W does not
generate files.
3.
USB Input Device (HID)
This device is used for communication to LogTag
®
Analyzer and its driver will always
be installed, even if LogTag
®
Analyzer is not present on the computer.
4.
USB Composite Device
macOS and Linux
Typically, in these operating systems a new drive will be mounted, from which you can
open the PDF file. You will not be able to configure the USRID-16W using either of these
operating systems, unless you use virtualization software such as Parallels, Fusion or
VirtualBox to create a hosted Windows environment. You need to discuss these options
with your network administrator.
www.
.com
1.800.561.8187