Reviewing Day Statistics on the Display
UTREL30-16 User Guide
39
Reviewing Day Statistics on the Display
Historic day statistics data can be accessed by pressing the
REVIEW
/MARK
button .
You can review the data regardless of whether the logger is still logging data, or has
already been stopped.
Following are some sample display screens you might see during a statistics review. All
display screens are based on the alarm settings made in
Alarm Configuration Options on
Today's data
Pressing the button displays the current day’s
maximum statistic:
l
The Today marker
flashes to indicate that
today's data is being displayed.
l
Today, no temperature values were recorded
above the upper alarm threshold, and no alarm
event was generated.
l
The maximum temperature recorded today was
-74.6 °C.
l
The paused function is enabled.
Pressing the button again displays the current
day’s minimum statistic:
l
still flashes, as the same day's data (today)
is being displayed.
l
Today, no temperature values were recorded
below the lower alarm threshold, and no alarm
event was generated.
l
The minimum temperature recorded today was
-79.4 °C.