logitrans LOGIFLEX ELFR, Руководство пользователя

Страница: 18 / 28

18
Regular inspection and the replacement of worn or defective parts in good time will
prolong the life of the Rotator. “Prevention is better than repair”, therefore ensure :
• Check battery every 14 cycles
• Correct usage
• Regular cleaning
• Periodic safety and service inspection
• For safety reasons please check the below every 3 month:
- Tighten loose screw and nuts
- Check that there are no cracks, fractures and deformations in
the bearing construction
- Wearing parts, such as brakes, wheels and bearings, are adjusted and
exchanged continuously
6.1 Lubrication and hydraulic oil
Under normal operation conditions the Rotator requires no lubrication.
All ball bearings are sealed and lubricated for life, and moving parts
have self-lubricating bearings or are treated with grease.
The hydraulic system is filled with hydraulic oil of viscosity class
ISO VG 15. An additive is added to the oil. The concentrate reduces
friction and wear and protects against corrosion. Pre-mixed hydraulic oil with additive
is available from the dealer. The oil is suitable for use in the temperature range
-10 to +50° C. A thinner oil is recommended for temperatures lower than -10° C (if
necessary, contact your dealer).
6.2 Oil change
Draining the oil:
1. Bring the unloaded forks down to the lowest position.
2. Most of the oil can be drained by loosening the hydraulic hose union and briefly
activating the hydraulic pump with the switch.
3. The remaining oil can be drained from the oil tank by taking off the twelve clips
on the pump and removing the tank.
Oil filling:
4. Fill oil through the filling hole on the tank.
5. Oil quantity: ELFR 920 & ELFSR 890 approx 1,5 liter
ELFR 1200 & ELFSR 1170 approx 3 liter
ELFR 1400 & ELFSR 1370 approx 3 liter
ELFR 1600 & ELFSR 1570 approx 3 liter
ELFR 1910 & ELFSR 1880 approx 4 liter
6. Refit the filling cap and bleed the system (6.6).
6.0 Long live the Rotator