Harmony 525
User Manual
1. From within the Harmony software, click the
Devices
tab.
2. Click
Settings
for the device you want.
3. Click
Learn infrared commands
.
Using the Infrared Sensor
The Harmony remote has an infrared sensor at the end opposite to the USB connector. The Harmony
remote uses this sensor to learn commands from original device remotes.
•
A:
Your original remote
•
B:
Distance between remotes: 5-10 cm (2"-5") apart
•
C:
Your Harmony remote
The following steps outline what happens when you press a button on your original remote control:
1. The infrared sensor on the Harmony remote learns the infrared signal.
2. The Harmony remote uploads it via the USB cable (and your computer's internet connection) to
the Harmony database.
3. The Harmony Remote Software will try to find a matching pattern for the infrared signal.
4. If no pattern is found, the signal will be stored as-is in its original format.
5. If a pattern is found, the Harmony Remote Software converts the signal into a format for
convenient storage.
Either way, the signal is then available for you to assign to a button on your Harmony remote.
v. 1.3
page 9
Содержание Harmony 525
Страница 1: ...Harmony 525 User Manual version1 3 ...
