- 3 -
1. Place the unit in an appropriate place after conducting a site
survey.
2. Connect the access point to ADSL modem, router, or
switch/hub in your network through the LAN port of the access
point by Ethernet cable.
3. Connect the A/C power adapter to the wall socket, and then
connect it to the ‘Power’ socket of the access point.
Note: WL0130 is built in with POE feature on the Ethernet
port. You can connect via RJ45 cable easily to the POE
switch what you have. Then you don’t need the power
adapter.
4. Please check all LEDs on the front panel. ‘PWR’ LED should
be steadily on, LAN LEDs should be on if the access point is
correctly connected to the ADSL modem, router or switch/hub.
3.2 Connecting to access point by web browser
1. Click ‘Start’ button
at lower-left
corner of your computer,
then click control panel.
Double-click
Network and
Internet Connections
icon, click
Network
Connections,
and then
double-click
Local Area
Connection, Local Area
Connection Status
window will appear, and
then click ‘
Properties
’
