5
1)
Remove the switch panel and connect the
Smart Embedded Light Switch
to the incoming
wiring by following the appropriate wiring diagram above.
2)
Connect the S1 and/or S2 to the wall switch side and check the wiring thoroughly.
3)
Prior to screwing the switch plate back onto the wall, you will need access to the SET button
on the top of the unit to enable you to connect the device to the Zigbee network.
4)
Follow the instructions in
Adding the Device to the Smart Home Network
to add the device.
Obviously, the device needs to be powered for this to work, so you will need to enable the
mains power at this point!
5)
Once you have connected the device to the Zigbee network, you can place the device inside
the back box on the wall and screw the switch plate back on.
