background image

14

 Disposal

Old units still have some residual value. An environmentally friendly method of disposal will 

ensure that valuable raw materials can be recovered and used again. The refrigerant and 

insulation materials used in the unit require special disposal procedures. Ensure that none of the 

pipes on the back of the unit are damaged prior to disposal. 
Up to date information concerning options of disposing of your old unit and packaging from 

the new one can be obtained from your local council office. 
If your unit is fitted with a lock, to prevent children being trapped inside, keep the key out of 

reach and not in the vicinity of the unit.
When disposing of an old unit break off any old locks or latches and remove the door as a 

safeguard.

 Maintenance

Changing the Internal Light

1.  Before carrying out the bulb replacement always switch the internal light to OFF, then 

disconnect the mains supply.

2.  Hold and unscrew the light bulb cover.
3.  Remove the plastic light bulb cover.
4.  Remove the old bulb by unscrewing in an 

anti-clockwise direction.

5.  Replace with a new bulb (10W SES). Please make 

sure that it is secure in the bulb cover.

6.  Refit the light bulb cover and reconnect your wine 

cooler to the mains supply and switch on.

Care When Handling

Hold the wine cooler around its sides or base when moving it. Under no circumstances should it 

be lifted by holding the edges of the top surface.

Installation

Don’t cover or block the sides of your wine cooler.

Servicing

This wine cooler should be serviced by a qualified technician and only genuine spare parts 

should be used. Under no circumstances should you attempt to repair the wine cooler yourself. 

Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. 

Switching Off for Long Periods of Time

When the wine cooler is not in use for a long period of time, disconnect it from the mains 

supply, empty all wine and clean the wine cooler, leaving the door ajar to prevent unpleasant 

smells.

LWC32B10_IB_final110309.indd   14

09/03/2011   11:43 AM

Содержание LWC32B10





















Отзывы: