7
Pairing for the 1st Time
To pair headphones that have never been paired with a Bluetooth device
before, please follow the steps below:
1. Activate the Bluetooth feature on the mobile phone or music player, and
set it search for new Bluetooth devices.
2. Press the button, until the blue indicator light flashes rapidly. The
headphones are now in pairing mode.
3. Select “LONBT13” from the list of found devices on the mobile phone
or music player. Some mobile phones list an option to “play through
headset”. Select to use the headphones.
4. If necessary, enter the password, “0000”, to pair and connect the
headphones. Some device also ask for confirmation of the headset
connection after paring.
5. The blue indicator will flash at approximately 5 second intervals after you
have successfully paired the headphones.
Switching On
For headphones already paired with a Bluetooth device.
1. To switch on, press and hold the button till the blue indicator lights up.
2. When the headphones are turned on, the blue indicator light will blink
slowly. The headphones will automatically search for the last paired
Bluetooth device.
If the unit is not connected to any Bluetooth device after 30 minutes, the
headphones will switch off automatically.
• Attention should be given to the environmental aspects of battery disposal.
• Batteries (battery pack or batteries installed) must not be exposed to
excessive heat such as sunshine, fire or the like.
4. Disconnect the headset from the computer.
The fully charged battery has power for up to 12 hours continuous music
playback, up to 500 hours of standby time.
LONBT13_QSG_Final_130205_chris.indd 7
5/2/13 10:44 AM
