
25
GB
INSTALLATION
16. Attach the toe panel mounting brackets to
the toe panel. Align the screw holes, then
using the 4 screws ST4x14 to secure the toe
panel.
17. Insert the toe panel to the dishwasher.
Water mains
Y-Adaptor
(not included)
Connect
to another
appliance if
required.
Water supply hose
18. Make sure your plumbing is suitable for use
with the dishwasher. If in doubt contact
a qualified plumber. This unit MUST BE
connected to COLD WATER MAINS using the
new water inlet hose. OLD HOSE SETS MUST
NOT BE RE-USED. The water pressure from
the water mains needs to be at a minimum
of 0.04 MPa and a maximum of 1.00MPa.
• Connect one end of the safety water
supply hose to your dishwasher, and
then connect the other end of the hose
to your water mains. Please ensure the
black rubber seal is in place.
• After connecting the hose, turn on your
water mains and check for leaks.
• Connect the dishwasher to the mains
socket.
You may use a Y-Adaptor (not
included)for an additional water
feed for another appliance, for
example a washing machine.
This is only applicable for cold
water mains. A Y-Adaptor is
available from most DIY stores.
About the Safety Supply Hose
The safety supply hose consists of
the double walls. The hose’s system
guarantees its intervention by blocking
the flow of water in case of the supply
hose breaking and when the air space
between the supply hose itself and the
outer corrugated hose is full of water.
LID45W13N_IB_131028_Zell.indb 25
28/10/13 11:01 AM
Содержание LID45W13N
Страница 2: ......