Logik LHDR15, Инструкция по эксплуатации

Страница: 16 / 24

16
DAB Operation
Ensure that you fully extend the aerial vertically before switching the unit on. When the unit
is connected to the mains power and then switched on from standby for the first time, or
you have just performed a factory reset the unit will automatically enter into the DAB mode
and perform auto scan function.
During the scan the display will show “Scanning ...”
together with a slide bar that indicates the progress
of the scan and the amount of stations that have been
found so far.
Once the scan has finished, the unit will select the first
alphanumerically found station.
To scroll through the found stations, press the
or button and then press the
SELECT button to listen to the selected station.
DAB Auto Scan
The auto scan will search for the entire DAB Band III channels. After the scan has finished,
the first alphanumerically found station will be automatically selected.
Full auto scan will not replace the DAB stations in memory it will add to it. If
you want to remove all the previous scanned stations, system reset or Prune is
required.
1. Press and hold the MENU/INFO button to enter the menu.
2. Press the
or button to select “Full scan”.
3. Press SELECT to confirm. The display will show “Scanning …” and a progressing
slide bar.
4. All the stations found will be stored automatically. To scroll through these stations, press
the
or button and then press the SELECT button to listen to the selected station.
Secondary Services
You may see a “<” symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra
services that are related to the primary station. e.g. a sports station may want to add extra
commentaries. The secondary services are inserted directly after the primary station in the
station list.
To select the secondary station, press the SELECT button when the “<” appears in
the display before the station name. When the secondary service ends, the unit will
automatically switch back to the primary station.
LHDR15_IB.indd 16 24/02/2016 08:30