GB
25
Clipping with the Cutting Length
Comb Attachment
1. Attach the comb attachment over the
cutting blade of the hair clipper.
2. Adjust the desired cutting
length by pressing on
the catch of the comb
attachment and pushing
it out or in on the cutting
length dents:
• to increase the cutting length, push out
the comb attachment
• to decrease the cutting length, push in
the comb attachment
3. There are 7 cutting length dents
with approximate lengths as follows:
(5/7/10/12/15/18/20) mm.
While attaching or detaching the
comb attachment, switch off the hair
clipper.
catch
Cleaning and Storage
Clean the hair clipper after every time you use
it. Do not use abrasives, scourers or liquids
such as alcohol, petrol or acetone to clean the
hair clipper.
1. Make sure the hair clipper is switched off
and unplugged.
2. Detach the comb attachment from the hair
clipper. You can wash the comb attachment
under running water.
3. Clean the cutting blade and its area with
the brush supplied. Do not wash under
running water.
4. After cleaning and drying, re-attach the
comb attachment and store the hair clipper
in a place out of the reach of children.
LHC20E_IB_5L_RC_200730_grace.indd 25
LHC20E_IB_5L_RC_200730_grace.indd 25
30/7/2020 10:55 AM
30/7/2020 10:55 AM
