Logik LFTC50W16, Инструкция по эксплуатации

Страница: 20 / 24

20
Adjusting the Feet
The cooker stands on 4 levelling legs. As the levelling legs are
adjusted at lower position, it is required to control whether
the product is levelled before operating it. This adjustment
can be made by turning the levelling leg clockwise to raise
the cooker, if required. It is possible to raise the product a
maximum of 30mm via the levelling leg. If the levelling legs
are adjusted appropriately, the product must NOT be moved
by dragging. The cooker must always be moved by lifting it
up. The levelling leg can be adjusted by hand or a metal plate
of the correct size to fit the slot.
Level the cooker by screwing the bottom of the feet in or out,
as shown.
Moving the Cooker
Using the fitted adjustable feet is MANDATORY. For safety reasons and to ensure adequate
ventilation, the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.
• Two people must always raise the cooker, as shown,
to prevent damaging the adjustable feet.
• Do not lift the cooker by the door handles.
• DO NOT DRAG the cooker. Lift the feet clear of the floor.
* All images are for indication only; please refer to your individual unit for actual item.
Stability Bracket
The supplied stability bracket or a recognized cooker stability device MUST be fitted.
50x60 : 420mm
Plastic Foot
Stability Bracket
Washer
Screw
You can connect a stability
chain (not supplied) to the
screws shown here.
LFTC50W16_IB.indd 20 20/05/2016 15:03