Logik LDW45S12, Руководство по установке, Страница: 16 / 36

16
Alternatively, you can judge the amount of rinse aid by checking the rinse aid indicator right next to the
reservoir’s cap. When the indicator is black, it means it is full. When it is clear, it means it is almost empty.
Adjusting the Rinse Aid Reservoir
The rinse aid reservoir has six settings. Both the recommended
setting and the factory setting is “4.” If the dishes are not drying
properly or are spotted, adjust the dial to the next higher number
until your dishes are spot-free.
Rinse aid warning light will illuminate when the reservoir is
running out of rinse aid and requires refilling.
Adding Rinse Aid
* All images are for reference only; please refer to your individual unit for actual item.
Rinse aid helps to ensure water does not cling and leave marks on crockery during the drying phase and
helps crockery dry faster after it has been washed. Only pour rinse aid that is for domestic dishwashers into
the reservoir. This model is designed to use liquid rinse aids only.
Please follow the steps below to pour the rinse aid into the storage reservoir, and the amount will dispense
automatically.
1. Turn the cap and open as indicated.
2. When the cap open marking is aligned, you
may lift the cap up.
3. Pour the rinse aid in until the level indicator
turns completely black in colour and close the
cap.
4. Be careful not to overfill the reservoir. Wipe
up any spills. The approximate volume of the
rinse aid reservoir is 110ml.
rinse aid warning light
open
rinse aid indicator
If the water hardness in your area is soft, you
may not need rinse aid as it may cause white film
to develop on your dishes.
* All images are for reference only; please refer to your individual unit for actual item.