Logik LCRDAB10, Инструкция по эксплуатации

Страница: 18 / 24

18
Maintenance
Hints and Tips
Problem Cause / Solution
No power Check that the power is switched on at the wall socket.
Check if the mains adapter is properly plugged into the unit
and the mains socket.
No sound Check that the volume control is
NOT
at minimum setting.
Check that the unit is NOT set to mute.
Desired station not
found
Adjust the aerial location and position to obtain a better
signal reception.
Tune to the correct radio channel frequency.
Radio channel
reception is poor
Adjust the aerial location and position to obtain a better
signal reception.
Tune to the correct radio channel frequency.
Function disturbed If none of the above solutions work, try switching off and
unplugging your unit, leaving it for two minutes and then
reconnect to the mains socket and switch it on again.
Ensure to unplug the unit from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the unit.
LCRDAB10_IB_final111001_Zell.indd 18 01/11/2011 12:22 PM