To ensure the filters do not become a fire
hazard we recommend they are washed ever
y
3 months. Do not check the filter panels whilst
the cooker hood is in use.
1
Before cleaning the filters always switch
off and disconnect the electrical suppl y.
2
Remove the filter panels by holding down
the buttons on each panel and lifting
towards you. They can then be taken out
of the cooker hood.
3 Wash filter in warm water and a
mild detergent, leave to soak and drain.
Ensure it is completely dry before
replacing into the cooker hood.
4 Place the bottom of
panel into the
left or right side of the cooker hood
and raise the
other side to click into position.
NOTE: The filter panels are also dishwasher
proof. The filter panels may alter in colour
slightly after several washes, this is not a fault.
Cleaning the filters
Maintenance and Troubleshooting
5
Changing the internal light
Allow the cooker hood to cool for at least
30 minutes after use before changing the
light bulb.
1
Before carrying out the bulb replacement
always switch off and disconnect the
electrical supply.
The Cooker hood is not working
•
Check it is plugged in and switched on.
•
Check that the fuse in the plug has
not blown.
•
Plug in another appliance, such as a
lamp, to see if the socket is working.
Servicing
Only an authorised, qualified technician
should perform repairs and maintenance of
the appliance.
The power of bulb must not be more than 20W.
2 remove the lamp rim by turning anti -
clockwise
Take the fixed lamp rim off by unscrewing
it in an anti-clockwise direction.
Draw the old lamp out of the lamp holder,
insert the new lamp in the lamp holder.
Screw the fixed lamp rim tightly in a
clockwise direction.
3 Remove the bulb and replace with a new one.
4 Replace lamp rim by aligning the rib to slot in
unit and turn clockwise.
5 Make sure the rim is lock in position
