Logik LCDHF512, Инструкция по эксплуатации

Страница: 14 / 28

14
Setting the Alarm Clock
During the unit in STANDBY mode: To set the correct “ALARM 1 or 2” :
1. Press the “ALARM 1 or 2 SET / OFF “ button once on the unit or remote control.
The “AL 1 or 2 BELL SYMBOL” indicator will light on. Press the “ALARM 1 or 2 SET
/ OFF” button one more time and hold it for a few seconds, then the “HOUR”
indicator will flash. Adjust to the correct “HOUR” by pressing the “SKIP / SEARCH”
(UP or DOWN) button.
2. Press the “ALARM 1 or 2 SET / OFF” button again. The “MINUTE” indicator will
flash. Adjust to the correct “MINUTE” by pressing the SKIP / SEARCH (UP or DOWN)
button.
3. Press the “ALARM 1 or 2 SET / OFF” button again to display the alarm modes
(TUNER, CD and BUZZER), select your preferred alarm mode by pressing the
“SKIP/SEARCH” button.
4. Press the “ALARM 1 or 2 SET / OFF” button repeatedly to confirm the “ALARM 1
or 2” function; the “HOUR / MINUTE” indicator will flash and switch to “CLOCK”, and
then the “AL 1 or 2 BELL SYMBOL” indicator will light on the LCD display.
• There is no alarm setting in AUX Mode.
• The buzzer will alarm under the CD mode if no CD in the compartment.
Setting the Sleep Timer
Use the sleep timer to turn the system off after a certain number of minutes in play
mode. By setting the sleep timer, you can fall asleep to music and know that your
system will turn off by itself rather than play all night.
To set the sleep timer press the SLEEP button on the remote control repeatedly, it
changes the number of minutes shown on the display in this sequence:
LCDHF512_IB_RC_121123_Zell.indd 14 23/11/12 12:03 PM