1
1
Unpacking
2
2
Operating your remote control
3
3
Connecting to the Mains Supply
4
4
Using in a car
5
5
Mounting in a car
6
6
Basic operation
T
ip:
T
ip:
POWER
AUDIO/
ANGLE
SUBTITLE/
TITLE
MENU/
ZOOM
STOP/
SLOW
DISPLAY
SOURCE
MUTE
REPEAT
/PROG
REPEAT
A-B
SETUP
GOTO
ENTER
VOL–
VOL+
POWER
AUDIO/
ANGLE
SUBTITLE/
TITLE
MENU/
ZOOM
STOP/
SLOW
DISPLAY
SOURCE
MUTE
REPEAT
/PROG
REPEAT
A-B
SETUP
GOTO
ENTER
VOL–
VOL+
Remote Control x 2
(with battery)
POWER
AUDIO/
ANGLE
SUBTITLE/
TITLE
MENU/
ZOOM
STOP/
SLOW
DISPLAY
SOURCE
MUTE
REPEAT
/PROG
REPEAT
A-B
SETUP
GOTO
ENTER
VOL–
VOL+
QSG-L72PDT13E-130314V1-1
You will find that there are many exciting features available.
To get to know all these features, please take some time to read the
instruction manual provided.
Mains Adapter x 2
Car Power
Adapter
Mounting Kit x 2
Instruction Manual
Quick Start Guide
DVD Player x 2
USB
AV OUT
PHONE
• ON
DC IN 12V
OFF •
Power adaptor
<:)
(
=6<;
7/65,
65
+*05=
6--
<:)
(
=6<;
7/65,
65
+*05=
6--
<:)
(
=6<;
7/65,
65
+*05=
6--
<:)
(
=6<;
7/65,
65
+*05=
6--
POWER
AUDIO/
ANGLE
SUBTITLE/
TITLE
MENU/
ZOOM
STOP/
SLOW
DISPLAY
SOURCE
MUTE
REPEAT
/PROG
REPEAT
A-B
SETUP
GOTO
ENTER
VOL–
VOL+
Thank you
for purchasing your new Logik DVD Player.
Please follow this quick start guide for a successful first time set up.
We recommend that you spend some time reading the instruction manual in order to
fully understand all the operational features it offers.
Read all the safety instructions carefully before use and keep the instruction manual for
future reference.
Remove all items from the packaging. Retain the packaging. If you dispose of it please
do so according to any local regulations.
Connecting for in-car Use
The included 12V car power adapter is designed for use with vehicles that have a 12V
electrical system.
1. Slide and hold the battery release tab in the direction of
the arrow.
2. Pull out the battery holder and remove the old battery.
3. Replace with a new battery.
4. Insert the battery holder back into the remote control.
Installation Guide
1. Insert DVD Player A and B into a
designed bags
2. Thread the mounting kit’s strap
ends through the strap eyelets.
3. Loop the straps around the headrest,
with the DVD Player facing the rear
seat, then fasten the straps with the
clip.
The mains adapter (DC12V output) supplied
is only for using the DVD Player
DVD Player B
(Right side)
DVD Player A
(Right side)
To DC IN
12V Socket
To DC IN
12V Socket
Car Power Adapter
(Included)
DVD Player A
(Right side)
Power
switch
DVD Player B
(Right side)
Install the batteries correctly by following the
polarity (+ and -) indications in the battery
compartment.
DVD Player A
DVD Player B
Car Power
Adapter
Remote
Control B
1
3
2
4
DVD Player
(Right side)
To the mains
socket
To DC IN
12V Socket
• ON
OFF •
Remote
Control A
• ON
OFF •
1. Slide the
ON/OFF
switch to the
ON
position.
2. Slide the
OPEN
switch to open the disc cover.
3. Hold the disc by its sides and carefully place
onto the disc holder with the label side facing
up. Gently push the disc down until you hear
a “click”.
4. Close the disc cover. Use the stand located at
the rear of the unit or hold the DVD player in
your hands (be careful not to touch the unit’s
disc door). The unit starts playback if the disc
does not have any menus recorded on it. If
the disc has one or more titles recorded on it,
a menu screen will appear on the screen.
5. To play a title, press the / 0-9 buttons
on the remote control to highlight the title and
then press the button on the unit or the
remote control.
Quick Start Guide
L72PDT13E
GB
Dual 7”
Portable DVD Player
L72PDT13E_QSG_130314_Zell.pdf 1 14/3/13 3:30 PM
