Logik L612WM12, Инструкция по установке / Руководство пользователя

Страница: 14 / 32

14
Standard Washing
1. Pull the door handle and put the laundry in the drum.
Make sure no laundry gets caught in the door.
2. Close the door and turn the Programme Dial to select
your wash programme and water temperature the
programme ready light will be on.
3. Adjust the Spin Speed (if required).
4. Select any Optional Functions.
5. Add detergent into the detergent drawer. The quantity
of detergent will depend on the amount of laundry,
the degree of soiling and the water hardness. Use the
amount of detergent suggested on the packaging of the
detergent.
6. Press the Start / Pause button to start the washing. The
programme ready light will switch off and the Start /
Pause button indicator will light up.
Wash Setting
First wash cycle
There may be water left inside your machine after factory testing. It is recommended that the first wash
cycle should be made without any laundry to remove this water; pour half a measuring cup of normal all
purpose detergent into compartment 2 and select cotton programme at 90°C.
• If the door is locked and you switched the washing
machine off - or if there’s a power cut - it will stay
locked for 2 minutes until you turn it back on again.
• If the machine is full of water, do not open the door.
Changing the programme
If you have selected a programme and you do not want it to continue:
• Press the Start / Pause button. The Start / Pause button indicator will flash.
• Turn the programme dial to the 0 (off) position.
• Adjust the programme dial to the programme you want.
• The programme ready light will be on.
• By pressing the Start / Pause button, run the programme which you have selected.
Manual Soaking
To manually soak your laundry, press the Start / Pause button after 10 minutes of the wash programme.
The washing machine will suspend the laundry to soak it in the water. After your desired soaking time,
press the Start / Pause button, the machine will continue the previous wash.
The Child Lock must be off, otherwise the initial programme selected will continue
when the programme dial is changed.
During initial start-up and use of the unit, there may be a slight smell while the
motor is setting in. This is not a fault; this is normal operation.
L612WM12_IB_120529_Annie.indd 14 12年5月29日 下午2:46