Logik L60CHDB12, Инструкция по эксплуатации и монтажу, Страница: 17 / 24

17
6. Assembling Hanging Plate Holes
Drill (A, B, C, D, E) holes on marked points by
using a Ф8mm drill bit. Push 5 pcs of plastic wall
plugs into the drilled holes (A, B, C, D, E). Put the
hanging plate on the holes A, B, E. Using the
supplied 4 x 40mm screws; screw the hanging
plate into the A, B, E holes.
7. Mounting the Hood to Wall
Hang the hood on the two hooks (F, G) on the
Hanging Plate. Using the supplied 4 x 30mm
screws, screw the Hood into Ф8mm wall plugs
(C, D) fixed in the wall.
Ensure the hood is level and then fully tighten
all the screws.
8. Mounting the Chimneys to Wall
Place the External Chimney over the Internal
Chimney and over the hood motor enclosure.
Adjust the height you want for the Internal
Chimney. Mark the positions "H" "I" "J" "K" as
shown. Drill (H, I, J, K) holes on marked points
by using a Ф8mm drill bit. Push 4 pcs of plastic
wall plugs into the drilled holes (H, I, J, K).
Screw the External Chimney into Ф8mm wall
plugs (H, I) fixed in the wall.
Screw the Internal Chimney into Ф8mm wall
plugs (J, K) fixed in the wall.
9. Ensure all protective coverings have been
removed from the metal surfaces prior to use.
10. Follow the operation instructions in this manual
for safe operation of this appliance.
L60CHDB12_LCHD60S12_IB_120919_Zell.indd 17 19/9/12 2:17 PM