16
Initial Setup
Turning the TV On for the First Time
1. Connect one end of the RF coaxial cable to
the aerial socket on the wall and the other
end of the cable to the ANT socket on the
back of your TV.
Do not connect the TV to the mains
supply until you have completed all
the connections.
2. Plug the TV into a mains socket and switch
on at the mains.
3. In standby mode, press the button
on the remote control to turn the TV on.
The red LED indicator will flash for a few
seconds then the TV will switch on.
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The button on the remote control is only used for switching the TV into standby, it does not disconnect the TV
from the mains power. To completely disconnect the mains power, please remove the mains plug from the mains
socket.
4. The first time you turn the TV on, it will go straight
into the First Time Installation menu. Please ensure
the aerial is plugged in.
Press the
buttons to highlight your language
then press OK.
5. Press the buttons to select your country.
6. Press the button to highlight Teletext Language,
then press the buttons to select your language.
The majority of people will want this set to West.
7. Press the button to highlight Scan Encrypted (pay-
per-view) Channel, then press the buttons to
select On or Off.
Select Broadcast Type
In this section you can tell your TV what to tune in.
Digital Aerial is TV through your aerial (Freeview) this is automatically set to On for UK customers.
Cable is if you have cable wired directly into your TV NOT through a set top box like Virgin.
Analogue is for analogue devices that you may have connected to your TV e.g. a video recorder.
8. Press the button to highlight Digital Aerial, then
press the buttons to select On or Off. On will only
search for the digital channels.
9. Press the button to highlight Select favourite
network type, then press the buttons to select
Digital Aerial, Digital Cable or Analogue. This can
only be chosen if you have selected more than one
Broadcast type. Confirm these settings by pressing
OK. Press the buttons to highlight Home Mode
then
RF coaxial cable
(not included)
L55UE17_IB.indd 16
31/07/2017 10:54
