21
Audio Mode
The unit will automatically switch between stereo and mono mode, but you can
override this and switch this function manually. This is helpful when receiving
poor signal reception.
Press the MENU button, then turn the VOLUME/SELECT control to select <Audio setting>,
then press the TUNE/ENTER button to confirm. Turn the VOLUME/SELECT control to
toggle between the Stereo allowed and Forced mono.
Storing Stations
You can store up to 10 of your favourite FM stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the
station that you would like to save, press and hold
the PRESETS RECALL/STORE button for 2 seconds.
The words “Save to P#” will show on the display.
2. Turn the VOLUME/SELECT control to select your desired preset station number and
then press the TUNE/ENTER button to confirm.
3. The station will be stored and the screen will then show “Preset # Stored“.
Recalling a Stored Station
1. Once you have saved a station to one of the preset buttons, you can recall it by pressing
the PRESETS RECALL/STORE button.
2. Turn the VOLUME/SELECT control to select your desired preset station number.
3. Press the TUNE/ENTER button to confirm the selection.
4. If you choose a preset that hasn’t been allocated a station, “Preset Empty“ will be
displayed.
Scan Settings
You can set your radio to tune in just the strongest stations or all stations.
Audio Settings
If the reception isn’t very good you can set your radio to forced mono which may slightly
clean up the crackling sound. The stereo allowed option will allow all stations to be in
stereo sound.
System Settings
Refer to the DAB section of the instruction book the setting are the same as the DAB settings.
• Please note that you have to press and hold the PRESETS RECALL/STORE
button for 2 seconds. If you see the word “Preset Recall” in the display you
didn’t hold the PRESET RECALL/STORE button down for long enough.
• If a radio station has previously been stored you will see “the stored station
name or frequency and P#” in the display. Press TUNE/ENTER and you can save
a new station into this preset position.
L55DAB15_IB_Final200325V6.indd 21
25/03/2020 17:56
