15
Recalling a Preset Station
1. Once you have saved a station to one of the preset buttons, you can recall it by pressing the
PREV / NEXT buttons and then press the ENTER button after pressing the PRESET button.
2. Press the PREV / NEXT buttons repeatedly to select your desired preset station number.
3. Press the ENTER button to confirm the selection.
FM Display Modes
Every time you press the INFO button, the display will cycle through the following display
modes: Radio Text, Programme Type, Signal Strength, Date/Time, Frequency, Audio Mode.
The information is displayed on the lower segment of the display.
Radio Text
As with DAB, the broadcaster can include a scrolling
text that displays information about the current
program. If Radio text information is not available, then
the display will show <Radio Text>.
Programme Type
This describes the “Style” or “Genre” of music that is
being broadcast e.g. “Rock” or “Classical”.
Signal Strength
The display will show a slide bar to indicate the signal
strength, the stronger the signal, the longer the bar will
be from left to right.
Time/Date
The broadcaster (radio station) provides clock and
date information automatically so there’s no need to
manually set this information.
Frequency
The frequency of the present station will be displayed,
such as “90.30MHz”.
Audio Mode
When in FM mode, the display will show if the station
being received is in mono or stereo. The receiver will
automatically switch between Stereo and Mono mode.
You can however override this function, so that you
can manually switch between Stereo and Mono mode,
which is helpful if you’re listening to a poor FM signal.
Radio Text
Programme Type
Signal Strength
Date/Time
Frequency
Audio Mode
To switch between mono and stereo, press
the ENTER button once, you will see on the
display “Auto” or “Mono”. To toggle between
each mode press the ENTER button again.
L4DAB12_IB_Final120618.indd 15
18/06/2012 3:50 PM
