1
1
Unpacking
2
2
Connections
3
3
Battery Replacement
4
4
General Operation
T
ip:
T
ip:
Quick Start Guide
White
Red
Quick Start Guide
Instruction
Manual
1
3
2
4
Thank you
for purchasing your new Logik Soundbar.
Please follow this quick start guide for a successful first time set up.
We recommend that you spend some time reading the instruction manual in order to fully understand all the operational features it offers.
Read all the safety instructions carefully before use and keep the instruction manual for future reference.
Remove all items from the packaging. Retain the packaging.
If you dispose of it please do so according to any local regulations.
Ensure all audio connections of the unit are
connected before connecting to the mains
power socket.
QSG-L32SWLB14-140304V2
You will find that there are many exciting features available.
To get to know all these features, please take some time to read the instruction manual provided.
Soundbar with
Wireless Subwoofer
L32SWLB14
Using the OPTICAL Connection
Using the AUX Connection
Using the MP3 LINK Connection
Connecting to the Mains Supply
3.5mm to RCA
Stereo Audio Cable
To the mains socket
Main Unit
Subwoofer
To the mains socket
3.5mm to 3.5mm
audio cable
OPTICAL cable
(not included)
TV
Rear view of
the unit
Rear view of
the unit
Side view of
the unit
TV
Audio device
Main Unit
Subwoofer
Remote Control
(battery included)
Wall Bracket x 2
Instruction Manual
Quick Start Guide
Mains Cable
(for Subwoofer)
3.5mm to 3.5mm
Audio Cable
3.5mm to RCA Stereo
Audio Cable
The remote control requires a CR2025, 3V Lithium battery.
1. Slide and hold the battery
release tab in the direction
of the arrow.
2. Pull out the battery holder
and remove the old battery.
3. Replace with a new battery.
4. Insert the battery holder
back into the remote
control.
Start Up
• Press
/SOURCE
on the main unit or on the remote control
to switch the main unit on. The status indicator of the last used
mode will light up.
• Press and hold
/SOURCE
on the main unit or press on the
remote control to switch the main unit back to Standby mode.
The
POWER
Indicator will light up red.
• Disconnect the mains plug from the mains socket if you want
to switch the unit off completely.
Selecting Modes
Press
/SOURCE
on the main unit or
SOURCE
on the remote
control repeatedly to switch between
AUX
,
MP3
LINK
,
OPTICAL
and
BLUETOOTH
modes.
Adjusting the Volume
• Press
VOL +/-
to adjust the volume.
• If you wish to turn the sound off, press
MUTE
on the remote
control. Press
MUTE
again or press
VOL +
to resume normal
listening.
Automatic pairing
The subwoofer and soundbar will automatically pair when both
units are plugged into the mains sockets and turned on.
• When the subwoofer is pairing with the main unit,
the
Pair
Indicator will flash.
• When the subwoofer is paired with the main unit,
the
Pair
Indicator will light up.
