8
1. To remove the stand assembly, untighten the 5 screws
holding the stand assembly to the rear of the TV. Slide
the stand assembly out.
2. Mounting on the wall. This TV is designed to be
wall-mounted with a standard 100 mm x 100 mm
mounting kit (sold separately) designed for flat-panel
TVs. Mount this TV according to the instructions
included in the mounting kit. Due to space restrictions,
we recommend that you make all connections before
mounting on to the wall.
1. Disconnect all cables connected to the TV.
2. Lay the TV down on a flat surface ideally
on the edge of a table so the base of the
TV slightly overhangs the edge of the table,
with the back side facing up. Please make
sure a soft cushioned material (such as a dry
bath towel or thick piece of foam) is placed
beneath the screen.
3. To install the TV stand, place the stand into
the stand recess on the back of the TV.
Installing / Removing the Base Stand
Four mounting holes
(size M6 screw)
The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be
sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with
it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance please call our Call Centre on 1 890 818 575. Our
Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
Keep all the spare screws should you want
to use the stand assembly option.
Remove the stand assembly before mounting the TV onto the wall.
Screw x 5
unscrew
screw in
Screws x 5
100 mm
100 mm
Table
Cushioned
material
Mounting the TV to a Wall
4. Secure the stand using the 5 screws provided.
L32HE13I_IB.indd 8
19/02/2014 10:24