Logik L22FPS10, Инструкция по эксплуатации

Страница: 11 / 20

11
Cleaning
• Always switch off and unplug the unit before cleaning.
• Never let the motor unit, mains cable or plug get wet.
• Wipe the motor unit with a damp cloth, then dry. Do not immerse the motor unit in
water.
• Immediately after use, always clean the parts that have come into contact with food,
using hot water and washing-up liquid.
• The slicing/shredding plate and knife blade can be cleaned in warm soapy water or in
the dishwasher.
• Make sure that the cutting edges of the blades and the plate do not come into contact
with hard objects. This could cause them to become blunt.
• Certain ingredients may cause discolourations of accessories. This is perfectly normal.
It will not harm the plastic or affect the colour of your food. The discolourations usually
disappear after some time.
• Handle blades and cutting plates with care especially during cleaning as they are
extremely sharp.
• Wash all attachments by hand, then dry thoroughly.
• Alternatively, they can be washed on the top rack of your diswasher. A short low
temperature programme is recommended.
Blender quick-clean operation
1. Pour lukewarm water (not more than 0.5 litres) and some washing-up liquid into the
blender jar.
2. Close the blender lid.
3. Let the appliance run for a few seconds by pressing the pulse control.
4. Detach the blender jar, remove the blender lid and rinse both with clean water.
L22FPS10_IB_final110218.indd 11 18/02/2011 12:12 PM