Product Overview
Unpacking
Remove all items from the packaging. Retain the packaging. If you dispose of it please do so
according to local regulations.
The following items are included:
Heating Function
Position the heater upright on the floor away from curtains, furniture or wall coverings before
plugging your heater into the mains socket.
• Connect the heater to the mains socket. Be sure the mains plug fits tightly in the mains
socket. A loose fit will cause overheating and damage the mains plug.
• Switch the heater on by turning the Power Dial, the power indicator will illuminate.
• Adjust the Power Dial to set the heating function:
Off mode:
The heater is off.
Fan mode:
The heating element is off, only the fan is operating.
The heater will blow cool air out from the air outlet.
Low Temp. mode: The heater is in low heat mode.
High Temp. mode: The heater is in high heat mode.
• To switch the heater off, turn the Power Dial to “Off” position. The power indicator will turn
off. Remove the mains plug from the mains socket.
Cleaning
Your heater should be cleaned regularly to prevent dirt and dust from building up which will
affect its performance. Ensure the air inlet and the air outlet are not blocked. This can be done
with a vacuum cleaner, using the brush attachment.
Hints & Tips
My heater does not work when I turn it on
• Check that your heater is plugged in and the power is turned on at the mains socket.
• The heater may be overheating. Switch it off and allow it to completely cool down for at
least 30 minutes, then switch it on again.
• Turn the Power Dial to the “High Temp” position.
• If the heater still does not work, do not try to repair the heater yourself.
If your heater’s power is automatically cut off follow the steps
below:
1. Unplug your heater and allow it to cool down for at least 30 minutes.
2. Inspect your heater.
3. Plug in the heater and switch it on again. If it cuts off again, move the heater to a better
ventilated location.
4. If there is any sign of physical damage (e.g. melting or burning of the case), do not attempt
to use your heater. Please leave all maintenance work to qualified personnel.
Installation
1. Lay down the unit on a flat stable surface, with the rear side facing up.
2. Unscrew the mains cable guard from
the rear base.
3. Fit the rear base on the unit. Guide the
mains cable through the centre of the
rear base and fit it into the groove of
the rear base. Screw the mains cable
guard onto the mains cable to secure
it on the rear base.
4. Connect the front base with the rear base.
5. Fix the front and rear base onto the unit by
screwing the four screws securely.
• If items are missing or damaged, please contact Partmaster (UK only).
• Tel: 0344 800 3456 for assistance.
It is normal for the heater to emit some smell and fumes when it is turned on for the
first time or when turned on after not being used for a long period of time. This smell
will disappear when the heater has been turned on for a short while.
Ensure you unplug your heater from the mains socket and wait for the heater to
cool down completely before cleaning.
The heater cannot be switched on when it is overheating. Allow it to cool down for
at least 30 minutes and then switch it on again.
Safety Protective Devices
Overheat Protection System
The power to the heater will automatically cut off if the temperature of the heater exceeds a
certain limit. In the event of overheating, the heater will stop operating. Switch the heater off
and allow it to completely cool for at least 30 minutes. The heater will then resume operating as
normal.
Oscillation Function
The heater is equipped with an oscillation feature. If you want to obtain a wider area of heat
circulation, turn the Oscillating Dial to the “On” position. To stop the oscillation, turn the
Oscillating Dial to the “Off” position.
Screw x 4
Rear Base
Front Base
The Main Unit
Specifications
Model
L20CTH17
Mains supply
220-240V ~50Hz
Power consumption
1900W (maximum power)
Features and specifications are subject to change without prior notice.
Power Dial
Oscillating Dial
Base
Power
Indicator
Air Outlet
Rear Base
Front Base
Tip-over Protective Switch
When you use the heater in an upright position on a flat and stable surface, the tip-over
protective switch will be on. In the event the heater is knocked over, the heater will stop
functioning automatically.
• Do not override the tip-over protective switch as this may cause a hazard.
• Using the unit on a deep pile carpet may activate the tip-over protective switch.
Mains Cable
Guard
Groove
Front
Base
Rear
Base
L20CTH17_IB_170707_grace.indd 4-6
5/7/17 4:35 pm