FILLING THE KETTLE
Open the lid and fill the kettle with the required
amount of water.
Do not exceed the maximum fill level (Max
1.7L) as indicated inside the kettle and not
less than the minimum fill level (Min 0.8L).
GB-1
GB-2
GB-3
SAFETY FIRST!
For your continued safety and to reduce the risk of injury or
electric shock, please follow all the safety precautions listed
below.
• Read all the instructions carefully before using this appli-
ance and keep them for future reference.
• Retain the manual. If you pass the appliance on to a third
party, make sure to include this manual.
• Unplug the appliance from the mains socket when not in
use, or before cleaning any part of the appliance.
• Allow the appliance to completely cool down before clean-
ing.
• Never immerse the appliance in water and always keep the
electrical contacts dry.
• Never place the appliance on or near a source of heat such
as a cooker ring or gas flame.
• Always place the appliance on a dry, flat and stable surface.
• Avoid contact with the steam from the appliance’s spout.
Take care when pouring or refilling after boiling.
• To prevent from boiling dry, do not fill the appliance with
water less than the minimum fill level as indicated on the
appliance.
• Do not use the appliance to heat anything other than water.
• Do not interfere with the normal working of the switch.
• Always keep the appliance out of the reach of small chil-
dren. Children should be taught about the dangers of boil-
ing water.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabili-
ties, or lack of experience and knowledge, unless they have
been given supervision or instructions concerning the use
of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not
play with the appliance.
• If the mains cable is damaged it must be replaced by the
manufacturer, its service agent, or similarly qualified
persons in order to avoid a hazard.
• Do not let the mains cable overhang the edge of the work
surface or allow it to touch hot surfaces or sources of heat or
flame.
• This appliance is intended to be used in households and
similar places such as:
- Staff kitchen areas in shops, offices and other work places.
- By clients in motels, hotels and Bed & Breakfast establish-
ments.
If the kettle is overfilled,
boiling water may be
ejected from the spout
and cause scalding.
FIRST TIME USE
Clean your kettle by boiling a full kettle of water twice and then discarding the
water.
PRODUCT OVERVIEW
Lid
Handle
Kettle Stand
Mains Cable
Water Fill
Level
Spout
Place the kettle on its stand. Connect the stand’s
mains cable to the mains socket.
Push the power switch down to the ON position
(indicated by the symbol ‘I’).
SWITCHING ON
The kettle stand comes packaged
inside the kettle. Remove the kettle
stand and place it on a firm, stable
and dry work surface.
• Never open the lid while the water is boiling. The steam coming out
from the kettle is very hot.
• If there is insufficient water in the kettle, the automatic safety cut-out
will operate. If this happens, allow the kettle to cool for ten minutes
before refilling with cold water and re-boiling.
The power switch will light up.
UNPACKING
Remove all packaging from the unit. Retain the packaging. If you dispose of it please
do so according to local regulations.
The following items are included:
• The Main Unit
• The Kettle Stand
* All images in this instruction manual are for indication only; please refer to your
individual unit
for details.
Power Switch
& Indicator
KEEPING THE MAINS CABLE TIDY
Extend the mains cable in the kettle stand
to the required length. Locate the mains
cable in the slot in the stand. For safety it is
recommended that the length of exposed
mains cable is kept as short as possible.
Slot
This kettle must only be used
with the stand provided.
L17TKS13_IB_RC_131120_Zell.pdf 2 20/11/13 4:51 PM
