GB-4
GB-5
Visit Partmaster.co.uk today for the easiest way to buy
electrical spares and accessories. With over 1 million
spares and accessories available we can deliver direct
to your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK
customers only). Calls charged at National Rate.
This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end of its
life separately from your household waste. There are separate collection
systems for recycling in the EU. For more information, please contact the
local authority or your retailer where you purchased the product.
IB-L17TKS13-131120V2
DSG Retail Ltd. (co. no. 504877)
Maylands Avenue, Hemel Hempstead, Herts., HP2 7TG, UK
CLEANING THE KETTLE
The kettle exterior should be cleaned with a soft damp cloth. Do not use abrasive
cleaners or scouring pads which may damage the finish of the kettle.
Never immerse the kettle or the stand in water and always keep the electrical
contacts dry. Always disconnect from the mains before cleaning the stand.
Do not insert any foreign objects or allow any liquid to spill into the
Power Connector Hole.
WHEN THE WATER HAS BOILED
The kettle will automatically switch off (indicated by the symbol ‘0’ ).
• Ensure that the switch is not
obstructed and the lid is firmly closed.
The kettle will not turn off if the
switch is obstructed or if the lid is
open.
• After removing the kettle, there may
be some water on the surface of the
stand. This is condensation from the
steam that causes the kettle to
automatically switch off after boiling.
This is normal and should not be a
cause for alarm.
DESCALING THE KETTLE
Depending on the hardness of the
water in your area, limescale may be
deposited on the heating element and
the inside of the kettle. This normal
build-up is not harmful to health but an
excessive amount of scale may affect
the performance of the kettle.
To descale, fill the kettle with distilled
water up to three-quarters of the Max
level and bring the water to boil. After
the kettle has switched off, add a
descaling solution following the
manufacturers instructions. Never
attempt to descale the kettle by
chipping or scraping with a sharp
implement.
SPECIFICATIONS
Mains supply:
220-240V~50Hz
Power consumption: 1850-2200W
We continually strive to improve our products. Specifications may change without
prior notice.
Ensure the kettle is cool before removing the filter.
CLEANING THE REMOVABLE SCALE FILTER
To prevent loose particles of limescale being poured into your beverage, your kettle
is fitted with a scale filter. You may remove the filter and fit it back in after cleaning.
To remove the filter, open the lid, then push the filter out from the spout.
To refit the filter open the lid then push the filter back in place from the inside of the
kettle.
Instruction Manual
Traditional
Stainless Steel Kettle
L17TKS13
Thank you
for purchasing your new Logik Kettle.
We recommend that you spend some time reading this instruction
manual in order to fully understand all the operational features it offers.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Power Connector Hole
Filter
L17TKS13_IB_RC_131120_Zell.pdf 1 20/11/13 4:51 PM
