GB-1
GB-2
GB-3
UNPACKING
Remove all packaging from the unit. Retain the packaging. If you dispose of it
please do so according to local regulations.
The following items are included:
SWITCHING ON
• Place the kettle on its stand. Connect the stand’s mains cable to the mains socket.
FIRST TIME USE
Clean your kettle by boiling a full kettle of water twice and then discarding the
water.
PRODUCT OVERVIEW
• The Main Unit
Lid
Handle
• Instruction Manual
(P.N.: L17KPS12-003)
• Kettle Stand
(P.N.: L17KPS12-005)
Spout
• Never open the lid while the
water is boiling. The steam
coming out from the kettle is
very hot.
• If there is insufficient water in
the kettle, the automatic
safety cut-out will operate. If
this happens, allow the kettle
to cool for 10 minutes before
refilling with cold water and
re-boiling.
Power Connector Hole
Indicator
Mains
Cable
Kettle
Stand
Power
Switch
Open
Button
FILLING THE KETTLE
• Push the Open Button down. The lid will spring open to 90˚.
• Fill the kettle with the required amount of water.
• Do not exceed the maximum fill level (MAX. 1.7L) as
indicated by the “MAX” mark on the interior of the
kettle.
• Always ensure the kettle is filled passed the
minimum fill level (MIN 0.9L) as indicated by the
“MIN” mark on the interior of the kettle.
• Gently push the lid closed. It will click shut to
indicate it is fully and securely closed.
If the kettle is overfilled, boiling water
may be ejected from the spout and cause
scalding.
90˚
• Pull the power switch up to the ON
position.
WHEN THE WATER HAS BOILED
The kettle will automatically switch off.
CLEANING THE KETTLE
The kettle exterior should be cleaned with a soft damp cloth. Do not use abrasive
cleaners or scouring pads which may damage the finish of the kettle.
Never immerse the kettle or the stand in water and always keep the electrical
contacts and the power connector hole dry. Always disconnect from the mains
before cleaning the stand.
DESCALING THE KETTLE
Depending on the hardness of the water in
your area, limescale may be deposited on
the heating element and the inside of the
kettle. This normal build-up is not harmful
to health but an excessive amount of scale
may affect the performance of the kettle.
To descale, fill the kettle with distilled water
up to three-quarters of the Max level and
bring the water to boil. After the kettle has
switched off, add a descaling solution
following the manufacturers instructions.
Never attempt to descale the kettle by
chipping or scraping with a sharp
implement.
• Ensure that the switch is not obstructed and the lid is firmly closed.
The kettle will not turn off if the switch is obstructed or if the lid is
open.
• After removing the kettle, there may be some water on the surface of
the stand. This is condensation from the steam that causes the kettle
to automatically switch off after boiling. This is normal and should not
be a cause for alarm.
• The indicator on the side of kettle will
light up blue to indicate that the kettle
is heating.
90˚
Stainless Steel Kettle
Instruction Manual
L17KPS12
Thank you
for purchasing your new Logik Kettle.
We recommend that you spend some time reading this instruction
manual in order to fully understand all the operational features it
offers.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
ON
OFF
ON
OFF
ON
OFF
C
M
Y
CM
MY
CY
CMY
K
L17KPS12_IB_RC_final120731_BW.pdf 2 31/7/12 3:51 PM
