Logik L160STB11, Инструкция по эксплуатации

Страница: 29 / 44

29
OK BACK
Channels
Install
Settings
MENU Thu, 3 Jun 20:21
Automatic Tune
Manual Scan
Restore Factory Default
Version
Format hard drive
OK:Tune BACK
MENU Thu, 3 Jun 20:29
Channel no
Freq(MHz)
Signal
Quality
45
666
42%
40%
Manual Scan
1. Press the MENU button and then press the
buttons to select Install. Press the button or
the OK button to confirm.
2. Press the buttons to select Manual Scan and
then press the OK button to confirm.
3. Press the buttons to choose the Channel No.
or Freq(MHz) and then press the OK button to
start manual scan.
Channel No.
Press the buttons to select the
channel number and then press the
OK button to start the manual scan.
Frequency
Press the 0-9 button to input the
desired frequency and then press the
OK button to start the manual scan.
4. When the channel is tuned, it will display on the
screen. If no channel is found, the system will
return to the manual scan menu in a short while
and then change to a previously tuned channel if
you have one.
L160_250STB11_IB_final110705.indd 29 05/07/2011 4:28 PM