Logik L14VUR12, Инструкция по эксплуатации

Страница: 12 / 20

3. Vigorously tap the HEPA filter on a hard surface until
no more dust can be seen falling out.
2. Remove the washable HEPA filter from the dust tank
by turning the cover.
Cleaning the HEPA Dust Tank Filter
The washable HEPA dust tank filter will stop 99.97% of all particles as small as 0.3
microns-many times smaller than a human hair. The filter stops most of these tiny
particles and airborne allergens from re-entering the air you breathe. Because
of this incredible filtration performance, the HEPA dust tank filter will quickly
accumulate many fine dust particles inside the white filter folds that are difficult
to see but which will eventually block or reduce your suction power, if not cleaned
properly.
• The white material in the HEPA filter will discolour over time. This is NORMAL and
will NOT affect the performance of the filter.
• Never overfill the dust tank. Remove dirt and clean the HEPA filter each time the
dust tank is emptied. Failure to keep the filter clean could result in the motor
becoming damaged.
1. To remove the HEPA filter, unlock and
remove the dust tank cover by turning the
cover anti-clockwise.
4. Alternatively, the HEPA filter may also be washed
by running it under the tap. We recommend that
you wash the filter once a week or when the suction
appears to have been reduced. Always allow 24 hours
for drying before inserting it back into the vacuum
cleaner.
HEPA
Filter
12
L14VUR12_IB_130614_chris.indd 12 14/6/13 6:08 PM