Logicube ZXi-10G, Руководство пользователя

Страница: 40 / 110

CLONING
Logicube ZXi-
10G™ User’s Manual
32
When Image to Drive mode is selected, the Image File window will list all available drives that may
contain ZXi-10G image files.
The (More Info) icon displays more
information on the drive. The drive details window
will appear showing information about the drive.
4.3 Settings
Tap the Settings icon to change the image settings. Depending on the selected mode, different screens
will appear.
•
Job Info – Available in all modes ( Section 4.3.1 ).
•
HPA/DCO – Available in the following modes ( Section 4.3.2 ) :
o
Drive to Drive
o
Drive to Image
•
Error Handling – Available in all modes ( Section 4.3.3 ).
•
Hash/Verification Method – Available in all modes ( Section 4.3.4 ). Hash Method is not
available in Image to Drive.
•
File Image Method Settings – Available in Drive to Image mode ( Section 4.3.5 ) .
•
Clone Method Settings – Available in the following modes ( Section 4.3.6 ):
o
Drive to Drive
o
Image to Drive
4.3.1 Job Info
Job Info is available in all cloning modes and allows users to enter information about the job.
Job Info is not required to start a clone operation. Information entered here will appear in the
logs. Tap any of the boxes and an on-screen keyboard will appear allowing information to be
entered. After entering the information, tap the
OK icon to go back to the previous screen.
Log names and file names can be customized by entering a Job Name .
if a clone operation is performed, and the Job Name is set to TestJob ,
the log name and file name will be called TestJob .
Subsequent Job Names that are the same will be identified with a dash,
then the next image number. For example, TestJob-1, TestJob-2, etc.
The unit will convert any non-POSIX portable characters used in Job
Name field to underscores “_“ when creating the log or file names.
POSIX portable characters are:
Uppercase A to Z
Period (.)
Lowercase a to z Underscore (_)
Numbers 0 to 9 Hyphen/Dash (-)