QUICK START
Logicube ZXi-
10G™ User’s Manual
24
▪
If a log file deletion password was not created, a confirmation screen will
appear confirming to delete the single log file or all log files.
▪
If a log file deletion password was created, a screen will appear prompting to
enter the log file deletion password. Enter the log file deletion password. Tap
the
OK
icon to delete the single log file or all the log files (depending on which
was selected).
The password can be set in the
Systems
Settings
. More information about the log file
deletion password can be found in
3.6.4 Accessing the Logs Over a Network
The log files can also be accessed through a network on a computer if the ZXi-10G is
connected to the same network.
1.
Open Windows Explorer or a similar window and browse to the hostname or the IP
address found in the Statistics screen. Use two backslashes before the hostname or IP
address as seen below. See
for more information on the Statistics screen.
2.
A Windows security screen will appear prompting to enter a User name and Password
to connect to the ZXi-10G. Login with the following credentials:
•
User name:
it
•
Password
it
