Logicube ZXi-10G Скачать руководство пользователя | Manualshive

Страница: 69 / 110

background image

TYPES OF OPERATIONS

Logicube ZXi-

10G™ User’s Manual

61

The asterisk (*) next to the profile name is the currently loaded profile.
After loading a profile, it is recommended to refresh the User
Interface. This can be done one of several ways:
- From the touch screen, go to the POWER OFF menu and tap the

Refresh

button.

- If a web browser is used for remote operation, press the F5 key on

the computer’s keyboard or locate the

Refresh

icon on the browser.

The Profiles tab allows users to create, save, and load different profiles with different
configurations. When a profile is loaded using the

Load

icon, the unit will load that profile

during its boot process.
For example, if the user wants the unit to always boot up with the default Clone mode of

Image

to Drive

:

1.

Turn the unit off then back on. This will reset all settings to the loaded profile. This is
an important step to help ensure only the changes desired will be the changes saved.

2.

Go to the

Clone

screen and set the

Mode

to ‘Image to Drive’.

3.

In the

System Settings

, go to

Profiles

and tap the

New

icon.

4.

Type a name for this profile. For example, ImageToDrive and tap the

OK

icon. The

profile name should appear on the screen.

5.

Tap the newly saved profile and tap

Save

. A confirmation screen will appear.

6.

Tap the

Yes

icon to save the profile.

7.

Make sure the profile to be loaded (during the boot process) is highlighted (for
example ImageToDrive.DB) and tap the

Load

icon. A confirmation screen will appear.

8.

The next time the unit is turned on it will load ImageToDrive profile.

To delete a profile, highlight the profile to be deleted then tap the delete icon. A confirmation
screen will appear. Tap the

Yes

icon to delete the selected profile.

When loading a profile, it may take
several seconds to completely load
the different profile.

5.9.2 Passwords

There are seven keys or passwords that can be set or changed.

•

Key: Log File Deletion

–

A key can be set as an extra layer of protection when deleting

log files. If this key is set, a key prompt will appear, and the correct key must be
entered before any log files can be deleted.

•

Key: Local HTTP

–

A key can be set to lock the local touch screen on the unit. If this

key is set, a key prompt will appear, and the correct key must be entered before
allowing access to the local touch screen.

«
...
67
68
69
70
71
...
»

Содержание ZXi-10G















































































































Отзывы:

Нет отзывов

Похожие инструкции для ZXi-10G

ComposerPlus 100 Disc

Бренд: Primera Страницы: 4

Бренд: U-Reach Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды