Quick Start Guide
TBT-QSG-v1.3
Page 4 of 5
Revised Date: 10/10/2019
Logicube, Inc. • 19755 Nordhoff Pl.,Chatsworth, CA 91311 USA• tel:+1
-818-700-
8488• fax:+1
-818-435-0088
6.
Using the included screwdriver, tighten the two small screws on each side of the I/O card into the
post.
7.
Take the labeled door and attach it back to the open I/O port. Use the included screwdriver to re-
tighten the screw to the I/O port door.
8.
Repeat steps 2 through 5 to install other Thunderbolt/USB-C I/O cards to any of the other
available I/O ports.
Once all the Thunderbolt/USB-C I/O cards have been properly installed, the Falcon-NEO can now be used
with Thunderbolt/USB-C external drives and storage enclosures. Any connected Thunderbolt/USB-C
external drive and enclosure should appear like any other drive.
The Falcon-NEO Thunderbolt 3/USB-C I/O Card is not hot-swappable. Always turn
the Falcon-NEO
off
before connecting or disconnecting the I/O card to/from the
Falcon-NEO. Drives or enclosures connected to the I/O card can be hot-swapped.
