Logicube F-FALCON-SA, Руководство пользователя

Страница: 70 / 168

TYPES OF OPERATIONS
Logicube Forensic Falcon™ User’s Manual
61

User profiles/configurations – Allows the user to create, save, apply, or delete
user profiles/configurations.

Passwords – Allows the user to set a password to lock the Falcon from any
configuration changes.

Encryption Settings – Sets the cipher mode (TC-XTS, CBC, or ECB), Cipher, IV
Generation, and the encryption password.

Language/Time Zone – Sets the language on the Falcon’s menu and change the
system’s Time Zone.

Display – Sets the Falcon’s display/screen brightness and enable/disable Stealth
Mode

Notification – Sets audible beeps/notifications for when a task successfully
completes or if an error appears.
12. NETWORK SETTINGS – Allows certain services to be enabled or disabled. Also, allows
the user to set proxy settings (if required by their network).
13. SOFTWARE UPDATES – Perform software updates on the Falcon. Software can be
updated over an internet connection (from network) or from a USB flash drive.
14. POWER OFF – Allows the user to turn the Falcon unit off by using the Graphical User
Interface (GUI). Also allows a drive timeout to be set, powering down drives when not in
use.
6.0.1 Imaging
This type of operation allows the imaging of a Source to a
Destination. There are three different imaging modes and
several settings to choose from. These selections should be
performed in order from left to right.
In-depth details on the different screens found in the Imaging operation can be
found in
Chapter 5: Imaging .
6.0.2 Hash / Verify
This type of operation allows the hashing of any connected
drive using one of the following algorithms:
SHA-1 , SHA-256 ,
MD5 , and SHA-1+MD5 . Case (Image) files created by the
Falcon can also be verified.