LogicPower LPT-1000RD, Руководство пользователя

Страница: 14 / 20

12 W W W . L O G I C P O W E R . U A
OPERATION, STORAGE AND TRANSPORTATION
The product can operate at the environment temperature 0–40 °С and relative
humidity 10 – 90% ( without condensing ). It is recommended to store the product in a
dry room.
Transportation must be done in the manufacturer’s packaging. It is allowed to
transport by any kind of ground (in closed compartments), river, sea, air (in sealed
compartments) without restrictions on the distance and speed allowed for this type of
transport. Stabilizers must be stored in a manufacturer’s container under a
temperature of the environment from
-20 to +40°С and relative humidity not more
than 90%.
In the storage room there should be no dust, vapors of acids and alkalies, which
cause corrosion.
WARNING ! If any other problems occur, please contact the supplier’s service center.
CHANGES
Due to the continuous improvement of the production, the manufacturer reserves the
right to make design changes, that are not described in this manual, which do not
reduce the consumer qualities of the product.
EQUIPMENT
Also, automatic turning off can happen due to heating of the windings of the
transformer over
120°С. In this case the “OVERHEAT” indication lights up . To return
to operating state it is needed to lower the load or to move the device to a room with a
lower environment temperature.
NOTE: during the operation, a small noise inside the stabilizer is allowed when the
input voltage fluctuates. Also a slight heating of the housing is possible.
Name
Stabilizer
User manual
Warranty ticket
Packaging
LPT-1000RD
1 pc .
1 pc .
1 pc .
1 pc .
LPT-1200RD
1 pc .
1 pc .
1 pc .
1 pc .