HSF - cablehandset
3. Mounting Instructions
ount the HSF - cablehandset underside your desktop in an appropriate position.
•
1 screw driver
lease take note, that the handset is equipped with a shift mechanism. Therefore
1) Unpack the handset.
M
Following tools are required for installation:
P
always mount the handset in a drawn in position.
Note:
Dispose of the packaging material ecologically sound (separate
plastic foil and cardboard)!
2) Place the handset on the underside of your desktop on the position of choice.
3) Fix the mounting plate with the 6 enclosed screws.
4) Connect the handset to the control box using the jack marked with
Note that the handset should be reached comfortably. Its front side should not
protrude over the table’s edge.
(DIN
45329, 7 – pin) only! Do not connect the handset plug to the motor jacks!!
Caution:
Unplug the power cord while mounting the LogicS control box!
Pict. 2 – Connect the HSF - cablehandset to the control box (e.g. LOGIC S)
Seite 8/15
