LogicBlue LevelMatePRO+, Руководство пользователя

Страница: 9 / 22

the unit to ignore motion during sleep mode and will require that the on/off
switch be cycled to wake from sleep.
The
Reverse Front View setting will show the back view of the vehicle
on the leveling screen when enabled. This can be beneficial for both
driveable and towable vehicles when using the front/side display mode on
the Leveling screen
. Enabling this setting will cause the driver’s side
information to be displayed on the left side of the phone screen and the
passenger side to be displayed on the right side of the screen (reversed if
Driving Side of Road setting is set to left). Disabling this setting will cause
the front view of the vehicle to be shown on the Leveling screen.
Note: Some settings both in the Setup Wizard and on the Settings screen
will be grayed out and inaccessible. Settings that are grayed out are not
available for your particular model of the LevelMatePRO.
Step 6)
Follow the steps on this screen to prepare your vehicle for the Set
Level process (figure 9). If you are setting up your Level ahead of
time and you are away from the vehicle it will be eventually installed in you may
want to complete the
‘Set Level’ step at a later time. If you would like to
postpone this step
you can tap the ‘Skip This Step’ link. When you are ready to
complete the Set Level step you can find the
‘Set Level’ button near the bottom
of the Settings screen in the LevelMatePRO app. You can also use this button
to reset the level at any time in the future if necessary.
Your Level setup is now complete and is ready for use. After tapping
the
‘Finish Setup’ button you will then be taken on a tour of the app to familiarize
you with its operation. You can step through the tour in either direction using the
‘Next’ and ‘Back’ buttons. Note that the tour will only be shown one time.
If you would like to go back through the Setup Wizard for any reason, you can
restart it by tapping the ‘Launch Setup Wizard’ button found near the bottom of
the Settings screen in the LevelMatePRO app.
8) Optional external power setup
Your Level can be powered externally using the micro-USB port. The
Level has an onboard transformer that has a maximum input of 15